Hallo Leute,
ich habe von DVBLogic die Info bekommen, dass mein bisher eingesetzter DVB-C-Stick (TT CT2-4400) nicht
mehr funktioniert, da die Treiber immer wieder von Synology entfernt werden würden.
Kann mir jemand einen Tipp geben, welche TV-Empfänger für DVB-C sowohl mit der
Synology (aktuellste Firmware) und TV Mosaic bzw. der Videostation funktionieren?
Danke.
Hier mal die Antwort von DVBLogic:
With the DSM V6.2 all third party drivers are swapped by system. We have tried a lot of times to find a workaround, but each time the DSM had "removed" our drivers.
Due to that fact the new Server called TVMosaic uses native drivers from Video Station.
The TVButler tuner and network receivers/tuners which supports sat2ip standard will work for sure.
As for other USB tuners, you may check the compatible tuners for your NAS here:
https://www.synology.com/en-global/compatibility
TVMosaic uses drivers for third parity usb tuners from Video Station app.
So, all you need is to Install the Video Station app and enable DTV function. Then go to TVMosaic Scan window. If your Tuner is supported by Synology, it will be visible at TVMosaic.
ich habe von DVBLogic die Info bekommen, dass mein bisher eingesetzter DVB-C-Stick (TT CT2-4400) nicht
mehr funktioniert, da die Treiber immer wieder von Synology entfernt werden würden.
Kann mir jemand einen Tipp geben, welche TV-Empfänger für DVB-C sowohl mit der
Synology (aktuellste Firmware) und TV Mosaic bzw. der Videostation funktionieren?
Danke.
Hier mal die Antwort von DVBLogic:
With the DSM V6.2 all third party drivers are swapped by system. We have tried a lot of times to find a workaround, but each time the DSM had "removed" our drivers.
Due to that fact the new Server called TVMosaic uses native drivers from Video Station.
The TVButler tuner and network receivers/tuners which supports sat2ip standard will work for sure.
As for other USB tuners, you may check the compatible tuners for your NAS here:
https://www.synology.com/en-global/compatibility
TVMosaic uses drivers for third parity usb tuners from Video Station app.
So, all you need is to Install the Video Station app and enable DTV function. Then go to TVMosaic Scan window. If your Tuner is supported by Synology, it will be visible at TVMosaic.